Binder system
바인더 시스템은 3D 프린팅 출력시 금속 또는 세라믹 분말과 혼합체를 구성하는 핵심적인 소재로 성형체 제작와 탈지시 형상 유지를 할 수 있게 하는 요소이다.
The binder system is a key material that constitutes the mixture with metal or ceramic powder during 3D printing output, and is an element that enables the production of a green part and the maintenance of shape during debinding.
Binder Manufacture M/C
Wax /Plasticizer
Back bone binder
Wax base binder
Feedstock
혼합체는 금속 또는 세라믹 분말과 바인더를 혼합하여 제작하며, 분말의 밀도, 입도와 형상 등에 따라서 분말의 함량비가 결정된다.
Feedstock is produced by mixing metal or ceramic powder with a binder, and the content ratio of the powder is determined based on the density, particle size, and shape of the powder.
Metal : Stainless steel, Titanium, Tungsten, Aluminum, Copper, Nickel Alloy Etc.
Ceramic : Zirconia, Alumina, Boron carbide, gadolinium(iii) oxide, SiC Etc
Kneader M/C
Powder/Binder kneading
Crush
Feedstock
Pellet
금속 또는 세라믹 분말과 바인더를 혼합하여 제조된 혼합체를 3D 프린터에 적용하기 위하여 균일한 소재로 만드는 과정이다.
This is the process of making a feedstock made by mixing metal or ceramic powder and binder into a uniform material for application to a 3D printer.
Applicable model
- MEX 3D Printing System
- D-MEX 3D Printing System
Metal feeder
Metal pellet
Ceramic feeder
Ceramic pellet
Filament (Rod)
금속 또는 세라믹 분말과 바인더를 혼합하여 제조된 혼합체를 3D 프린터에 적용하기 위하여 균일한 Rod type 소재로 만드는 과정이다.
This is the process of making a feedstock made by mixing metal or ceramic powder and binder into a uniform rod-type material for application to a 3D printer.
Spec. : Ø3.0±0.1, 100±0.1mm
Applicable model : ME-300 3D Printing System
Metal, Ceramic Rod
CP-Titanium
Zirconia (White color)
Filament Cartridge
REPROTECH Solution
Based on our technological prowess, we will create a new world together with you.
